Discover About Spiral Classifier Before Buys From Screw Classifier Manufacturer

The screw classifier or spiral classifier by Screw Classifier Manufacturer is the common tool in the flotation separating process. It is a key tool in the flotation separating process. It is ideal for dewatering, drainage, medium, and spraying in ore dressing for fine material dry and wet classifying in the mine. The spiral classifier is the most important tool of the dry powder preparation process in the sector of chemicals, building materials, food processing, and so on. The performance of the spiral classifier not only determines the product quality also affects the system’s energy consumption.

 

The screw classifier is extensively used for allocating ore sand forming with a ball mill a closed-circuit cycle in the ore beneficiation plant for unraveling ore sand and fine sand into the gravity concentration plant for grading the particle size into the metal ore separation and for dewatering and demanding into the ore washing procedure. At present, the need for the powder is greatly increasing thus putting ahead greater needs for grading tools that shouldn’t be highly efficient and energy-saving and grading but also making particle size of the finished products meet particular needs.

 

The screw classifier counterparts well with a ball mill for shaping the closed circuit for ore concentrating. When used in the gravity concentrator, the mishmash also grades ore and fine mire and does the particle size categorization in the metal slurry beneficiation procedure. Besides, this set of screw classifiers and the ball mill can be used for washing off the mire and drying it out. The machine is dependable and easy to use.

 

Structure-

Screw Classifier by Screw Classifier manufacturer is primarily comprised of the driving device, groove body, spiral body, lower set, lifting mechanism, and discharge value. The machine base takes on channel steel, the body takes on the welded steel plate. Screw shaft parts use pig iron and wear resistance.

 

Working principle-

Screw classifier uses the rule of the quantity unlike of solid particles so the precipitation velocity is also unlike in the fluid. Fine mineral particles glide into the water and run over, the coarse ore particles settle down on the foot of the channel. Material discharged from the upper by spiral so as to finish the grading job. It puts the coarse material in the mill inlet by using a spiral rotary vane for filtering the fine materials and be dispersed from the overflow pipe.

 

Features-

-             It isn’t easier to damage and the rate of repairing is minimal.

-             Powder quality is controllable and fineness adjustment is reliable.

So buy now the best spiral classifier from a reliable Screw Classifier Manufacturer.